01 > ȸҰ
회사소개
|
제품쇼핑구매
|
자료실
|
고객지원
회사소개
|
회사개요
|
찾아오시는길
FPGA/CPLD
|
DSP/ARM
|
Others
|
부품
|
산업용보드
일반자료실
|
DSP/ARM
|
FPGA/CPLD
|
부품
|
산업용보드
공지사항
|
질문답변
|
구매안내
로그인
|
회원가입
|
장바구니
(0)
|
주문조회
|
마이페이지
:: 글답변 ::
이 름
패스워드
이메일
홈페이지
옵 션
html
제 목
> > > 1. > By default the Raspberry Pi’s serial port is configured to be used for console input/output. Whilst this is useful if you want to login using the serial port, it means you can't use the Serial Port in your programs. To be able to use the serial port to connect and talk to other devices (e.g. Arduino), the serial port console login needs to be disabled. > > Needless to say you will need some other way to login to the Raspberry Pi, and we suggest doing this over the network using an SSH connection. > > Disable Serial Port Login > > To enable the serial port for your own use you need to disable login on the port. There are two files that need to be edited > > The first and main one is /etc/inittab > > This file has the command to enable the login prompt and this needs to be disabled. Edit the file and move to the end of the file. You will see a line similar to > > T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100 > > Disable it by adding a # character to the beginning. Save the file. > > #T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100 > > Disable Bootup Info > > When the Raspberry Pi boots up, all the bootup information is sent to the serial port. Disabling this bootup information is optional and you may want to leave this enabled as it is sometimes useful to see what is happening at bootup. If you have a device connected (i.e. Arduino) at bootup, it will receive this information over the serial port, so it is up to you to decide whether this is a problem or not. > > You can disable it by editing the file /boot/cmdline.txt > > The contents of the file look like this > > dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait > > Remove all references to ttyAMA0 (which is the name of the serial port). The file will now look like this > > dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait > > Reboot > > In order you enable the changes you have made, you will need to reboot the Raspberry Pi > > sudo shutdown -r now > > Test the Serial Port > > A great way to test out the serial port is to use the minicom program. If you dont have this installed run > > sudo apt-get install minicom > > Connect your PC to the Raspberry Pi serial port using an appropriate serial port adapter and wiring, then open Putty or a similar serial terminal program on PC side. Setup a connection using the serial port at 9600 baud. > > Now run up minicom on the Raspberry Pi using > > minicom -b 9600 -o -D /dev/ttyAMA0 > > What you type into the minicom terminal screen should appear on the serial PC terminal and vice versa. > > 2. > raspberry> sudo raspi-config 후 serial disable >
링크 #1
링크 #2
파일첨부
왼쪽의 글자를 입력하세요.