01 > ȸҰ

 
작성일 : 14-04-17 15:21
am335x ramdisk booting 설정
 글쓴이 : 이로직…
조회 : 28,850  

BeagleBoard.org›demo›angstrom

Angtrom Demo from Windows

This page seeks to describe steps to make use of thepre-built Angstrom distributionmentioned inKoen's blog,but using only Windows. This is due to the fact that many people trying Beagle and Angstrom for the first time have not previously used Linux.

Use existingddimage to write the SD card

  1. Downloaddd for Windowsfromhttp://www.chrysocome.net/downloads/dd-0.5.zip
  2. Download compressedddimage fromhttp://s3.amazonaws.com/beagle/angstrom-demo-20080917.img.gz
  3. Usegunziporzcatto decompress the image andddto write the image to the SD card
  4. From the Beagle u-boot prompt, setup u-boot for booting kernel from uImage file on the first partition of the SD card and rootfs on the second partition on the SD card
    setenv bootargs 'console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootwait video=omapfb:vram:2M,vram:4M nohz=off'
setenv bootcmd 'mmcinit;fatload mmc 0 84000000 uImage;bootm 84000000'
saveenv

Resizeddimage to use the rest of the card(currently broken)

  • Boot ramdisk
    setenv bootargs 'console=ttyS2,115200n8 console=tty0 root=/dev/ram0 rw ramdisk_size=32768 initrd=0x81600000,32M nohz=off'
setenv bootcmd 'mmcinit;fatload mmc 0 80300000 uImage;fatload mmc 0 81600000 angstrom-console-rd.gz;bootm 80300000'
saveenv
    Hold user button and press reset
  • Resize ext3 partition
    root@beagleboard:~# umount /media/mmcblk0p1/
root@beagleboard:~# umount /media/mmcblk0p2/
root@beagleboard:~# fdisk /dev/mmcblk0

Command (m for help): p

Disk /dev/mmcblk0: 4026 MB, 4026531840 bytes
255 heads, 63 sectors/track, 489 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

        Device Boot      Start         End      Blocks  Id System
/dev/mmcblk0p1   *           1          15      120456   c Win95 FAT32 (LBA)
/dev/mmcblk0p2              16          62      377527+ 83 Linux

Command (m for help): d
Partition number (1-4): 2

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (16-489, default 16): Using default value 16
Last cylinder or +size or +sizeM or +sizeK (16-489, default 489): Using default
value 489

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table
 mmcblk0: p1 p2
root@beagleboard:~# kjournald starting.  Commit interval 5 seconds
EXT3 FS on mmcblk0p2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.

root@beagleboard:~# opkg install e2fsprogs e2fsprogs-e2fsck

root@beagleboard:~# fsck.ext3 -f /dev/mmcblk0p2
e2fsck 1.38 (30-Jun-2005)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/mmcblk0p2: 21678/94752 files (1.2% non-contiguous), 346421/377524 blocks

root@beagleboard:~# resize2fs /dev/mmcblk0p2
resize2fs 1.38 (30-Jun-2005)
Resizing the filesystem on /dev/mmcblk0p2 to 3807404 (1k) blocks.

root@beagleboard:~# resize2fs -d 1 -p /dev/mmcblk0p2
resize2fs 1.38 (30-Jun-2005)
Resizing the filesystem on /dev/mmcblk0p2 to 3807404 (1k) blocks.
Begin pass 1 (max = 418)
Extending the inode table     XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Segmentation fault

Build the 'dd' image if you don't already have it

  • Download MLO, u-boot.bin, uImage, the latest *.rootfs.tar.bz2, and README.txt fromhttp://www.angstrom-distribution.org/demo/beagleboard/
  • Download a working 32MB ramdisk image fromhttp://jkridner.s3.amazonaws.com/angstrom-console-rd.gz
  • Search for other packages you might want to use athttp://www.angstrom-distribution.org/repo/
  • Use HP utility to format the SD card. Details found athttp://code.google.com/p/beagleboard/wiki/BeagleBootHwSetup
    Be sure to copy the MLO file first, then to copy over u-boot.bin, then all of the other downloaded files.
  • Setup u-boot for booting kernel from the uImage file on the SD card and rootfs from the ramdisk (angstrom-console-rd.gz) on the SD card
    setenv bootargs 'console=ttyS2,115200n8 console=tty0 root=/dev/ram0 rw ramdisk_size=32768 initrd=0x81600000,32M nohz=off'
setenv bootcmd 'mmcinit;fatload mmc 0 80300000 uImage;fatload mmc 0 81600000 angstrom-console-rd.gz;bootm 80300000'
saveenv
  • Copy files over to flash so that you have a copy after erasing the contents of the SD card:
    opkg install ./mtd*
flash_eraseall /dev/mtd4
mount -t jffs2 /dev/mtdblock4 /media/hdd
cp /media/mmcblk0p1/* /media/hdd/
  • Re-partition the SD card
    Command (m for help): p

Disk /dev/mmcblk0: 4026 MB, 4026531840 bytes
255 heads, 63 sectors/track, 489 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

        Device Boot      Start         End      Blocks  Id System
/dev/mmcblk0p1   *           1         490     3932128+  c Win95 FAT32 (LBA)
Partition 1 has different physical/logical endings:
     phys=(488, 254, 63) logical=(489, 135, 30)

Command (m for help): d
Selected partition 1

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-489, default 1): Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-489, default 489): 15

Command (m for help): a
Partition number (1-4): 1

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (16-489, default 16): 16
Last cylinder or +size or +sizeM or +sizeK (16-489, default 489): Using default
value 489

Command (m for help): t
Partition number (1-4): 1
Hex code (type L to list codes): c
Changed system type of partition 1 to c (Win95 FAT32 (LBA))

Command (m for help): p

Disk /dev/mmcblk0: 4026 MB, 4026531840 bytes
255 heads, 63 sectors/track, 489 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

        Device Boot      Start         End      Blocks  Id System
/dev/mmcblk0p1   *           1          15      120456   c Win95 FAT32 (LBA)
/dev/mmcblk0p2              16          62      377527+ 83 Linux

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table
 mmcblk0: p1 p2
root@beagleboard:/media/hdd# FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev mmcblk0p2.

umount /dev/mmcblk0p1
umount /dev/mmcblk0p2
  • Format the partitions on the SD card
    root@beagleboard:/media/hdd# opkg update; opkg install dosfstools
root@beagleboard:/media/hdd# root@beagleboard:/media/hdd# mkfs.vfat -F 32 /dev/mmcblk0p1 -n SDCARD_X
mkfs.msdos 2.11 (12 Mar 2005)
root@beagleboard:/media/hdd# opkg install e2fsprogs-mke2fs
root@beagleboard:/media/hdd# mkfs.ext3 /dev/mmcblk0p2
  • Copy files onto SD card
    root@beagleboard:/media/hdd# mount /dev/mmcblk0p1/ /media/mmcblk0p1/
root@beagleboard:/media/hdd# cp mlo /media/mmcblk0p1/MLO
root@beagleboard:/media/hdd# cp u-boot.bin /media/mmcblk0p1/
root@beagleboard:/media/hdd# cp uImage /media/mmcblk0p1/
root@beagleboard:/media/hdd# mkdir /media/mmcblk0p2
root@beagleboard:/media/hdd# mount /dev/mmcblk0p2 /media/mmcblk0p2
kjournald starting.  Commit interval 5 seconds
EXT3 FS on mmcblk0p2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
root@beagleboard:/media/hdd# cd /media/mmcblk0p2
root@beagleboard:/media/mmcblk0p2# tar xvjf /media/hdd/Angstrom-Beagleboard-demo-image
-glibc-ipk-2008.1-test-20080917-beagleboard.rootfs.tar.bz2
root@beagleboard:/media/mmcblk0p2# cd /media/hdd
root@beagleboard:/media/hdd# sync
  • Setup u-boot for booting kernel from uImage file on the first partition of the SD card and rootfs on the second partition on the SD card
    setenv bootargs 'console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootwait video=omapfb:vram:2M,vram:4M nohz=off'
setenv bootcmd 'mmcinit;fatload mmc 0 84000000 uImage;bootm 84000000'
saveenv
  • Install useful apps
    opkg update
opkg install vim screen tar bash
opkg install mtd-utils e2fsprogs e2fsprogs-e2fsck e2fsprogs-mke2fs dosfstools
opkg install git curl task-native-sdk cpp imagemagick
opkg install quake2 sugar smbfs
  • C:\>dd --list
rawwrite dd for windows version 0.5.
Written by John Newbigin 
This program is covered by the GPL.  See copying.txt for details
Win32 Available Volume Information
\\.\Volume{f2d19eb4-23f6-11db-a984-806d6172696f}\
  link to \\?\Device\HarddiskVolume1
  fixed media
  Mounted on \\.\c:

\\.\Volume{1bba7385-4935-11dd-80e5-00059a3c7800}\
  link to \\?\Device\Harddisk1\DP(1)0-0+b
  removeable media
  Mounted on \\.\j:

C:\>dd if=\\.\Volume{1bba7385-4935-11dd-80e5-00059a3c7800} of=angstrom-dd.img --size
rawwrite dd for windows version 0.5.
Written by John Newbigin 
This program is covered by the GPL.  See copying.txt for details
240912+0 records in
240912+0 records out

Last updated by blog.hangerhead.com on Tue Nov 04 2008 14:45:21 GMT-0000 (UTC).